POWER SUPPLY BOARD:
ABOUT THE PRODUCT
Power Board
WHAT WE ARE GOING TO DO:
-It is a general purpose board to provide power supply.
HARDWARE AND SOFTWARE REQUIRED:
Hardware:
- 12V Adaptor-1 Nos
- Power board-1 Nos.
- Multimeter-1 Nos
DETAIL AND OPERATION OF THE PRODUCT :
- Provide 12v power supply board
- It has three various power supply pins
- It has 7805 voltage regulator is present to convert 12v to 5v
- It has 1117 voltage regulator is present to convert 5v to 3.3v
- It has two LED RED & YELLOW.
- RED led is used to indicate the 5v power supply
- YELLOW led is used to indicate the 3.3v power supply
CONNECTION:
-Provide 12v power supply to power board
PROCEDURE:
- As per connections given
- Place the multimeter positive to the 12v and the gnd of multimeter to the gnd pin
- Same should be followed for the 5v and 3.3v
OUTPUT :
The corresponding values can be displayed in the multimeter..
WHAT SHOULD NOT BE DONE:
Connection of vcc & gnd should not change
